|
|
|
|
|
1 mm, rolled applied, low-emission, easy to apply, water-based epoxy flooring system with broadcast antislip surface and broadcast color chips gloss UV resistance finish
Industrial, commercial and residential flooring system for indoor and outdoor applications and horizontal surfaces, suitable for light-duty in low traffic areas, with moderate chemical resistance and improved functional aesthetics
General industry, manufacturing and production halls, workshops, logistics centers, warehouses, domestic/private garages, basements, below-grade areas, technical rooms, retailers, functional floors in residential and commercial buildings, and stairs and corridors
| Layer | Description | Material | Consumption | |
|---|---|---|---|---|
 | Substrate | Concrete / cementitious screed | ||
| 1 |  | Primer | KÖSTER CT 215 Universal Floor diluted 10 to 25 % with water. The amount of water depends on the substrate porosity. | 0.25 kg/m² per layer (approx. 0.20 resin + 0.05 water) |
| 2 |  | Thincoat | KÖSTER CT 215 Universal Floor | 0.30 kg/m² |
| 3 |  | Broadcast | KÖSTER Color-Chips | 0.85 kg/m² (> 0.050 kg/m² contrast / 0.7–1.0 kg/m² full blind) |
| 4 |  | Topcoat | KÖSTER TS Transparent. Glossy finish and exceptional cleanability and resistance | 0.15 kg/m² |
Comments
| Material | Substrate conditions | Application conditions | Mixing regime | Application tools | Pot life / Recoating interval / Ready for traffic | |
|---|---|---|---|---|---|---|
| Concrete / cementitious screed | ||||||
| 1 | KÖSTER CT 215 Universal Floor diluted 10 to 25 % with water. The amount of water depends on the substrate porosity. | ICRI CSP 3–5 (depending on the expected traffic) by shot blasting Clean, sound and visible dry Tensile strength > 1.5 N/mm² Substrate relative humidity: < 4 % CM Device | Material temperature 15–25 °C Substrate and ambient temperature 10–30 °C Substrate and material temperatures must be ≥ 3 °C above dew point during application and for 24 h. | Electric single or double paddle mixer (300–400 rpm) Mix for 2 min Transfer to a clean container Add water Mix for an additional 1 min and scrape the sides | Rubber Squeegee 40 cm (CT 922 002) Resin Roller 25 cm (CT 961 002) Resin Roller 10 cm (CT 913 001) | Pot life: 60 min. Recoating interval: 10 °C: 24 - 72 h 20 °C: 12 - 48 h 30 °C: 8 - 48 h |
| 2 | KÖSTER CT 215 Universal Floor | Clean, sound and visible dry Tensile strength > 1.5 N/mm² Substrate relative humidity: < 4 % CM Device | Material temperature 15–25 °C Substrate and ambient temperature 10–30 °C Substrate and material temperatures must be ≥ 3 °C above dew point during application and for 24 h. | Electric single or double paddle mixer (300–400 rpm) Mix for 2 min Transfer to a clean container Mix for an additional 1 min and scrape the sides | Rubber Squeegee 40 cm (CT 922 002) Resin Roller 25 cm (CT 961 002) Resin Roller 10 cm (CT 913 001) | Pot life: 60 min. Recoating interval: 10 °C: 24 - 72 h 20 °C: 12 - 48 h 30 °C: 8 - 48 h |
| 3 | KÖSTER Color-Chips | |||||
| 4 | KÖSTER TS Transparent. Glossy finish and exceptional cleanability and resistance | Previously primed, scratchcoated, sandbroadcast or coated surface. Clean, sound and visible dry Tensile strength > 1.5 N/mm² Substrate relative humidity: < 4 % CM Device | Material temperature 15–25 °C Substrate and ambient temperature 5–30 °C Substrate and material temperatures must be ≥ 3 °C above dew point during application and for 4 h. | Electric single mixer (300–400 rpm) Mix for 2 min Transfer to a clean container Mix for an additional 1 min | Rubber Squeegee 40 cm (CT 922 002) Resin Roller 25 cm (CT 961 002) Resin Roller 10 cm (CT 913 001) | Pot life: 20 min. Recoating interval: 10 °C: 6 - 24 h 20 °C: 4 - 24 h 30 °C: 3 - 24 h Ready for light traffic (hours) / fully cured (days): 10 °C: 24 h / 5 d 20 °C: 12 h / 3 d 30 °C: 8 h / 2 d |
