|
|
|
|
|
0.3 mm, rolled applied, low-emission (AgBB compliant), easy to apply, water-based epoxy coating system with smooth surface and single-color matt finish
Industrial, commercial and residential protection coating system for indoor applications and vertical and horizontal surfaces, suitable for light-duty in wall areas, with moderate chemical resistance and functional aesthetics
General industry, manufacturing and production halls, workshops, logistics centers, warehouses, domestic/private garages, basements, below-grade areas, technical rooms, retailers, functional floors in residential and commercial buildings, and stairs and corridors
| Layer | Description | Material | Consumption | |
|---|---|---|---|---|
 | Substrate | Concrete / cement-based materials | ||
| 1 |  | Primer | KÖSTER CT 215 Universal Floor diluted 10 to 25 % with water. The amount of water depends on the substrate porosity. | 0.25 kg/m² per layer (approx. 0.20 resin + 0.05 water) |
| 2 |  | Topcoat | KÖSTER CT 215 Universal Floor. Matt finish and good cleanability | 0.25 kg/m² |
Comments
| Material | Substrate conditions | Application conditions | Mixing regime | Application tools | Pot life / Recoating interval / Ready for traffic | |
|---|---|---|---|---|---|---|
| Concrete / cement-based materials | ||||||
| 1 | KÖSTER CT 215 Universal Floor diluted 10 to 25 % with water. The amount of water depends on the substrate porosity. | Clean, sound and visible dry Tensile strength > 1.5 N/mm² Substrate relative humidity: < 4 % CM Device | Material temperature 15–25 °C Substrate and ambient temperature 10–30 °C Substrate and material temperatures must be ≥ 3 °C above dew point during application and for 24 h. | Electric single or double paddle mixer (300–400 rpm) Mix for 2 min Transfer to a clean container Add water Mix for an additional 1 min and scrape the sides | Resin Roller 25 cm (CT 961 002) Resin Roller 10 cm (CT 913 001) | Pot life: 60 min. Recoating interval: 10 °C: 24 - 72 h 20 °C: 12 - 48 h 30 °C: 8 - 48 h |
| 2 | KÖSTER CT 215 Universal Floor. Matt finish and good cleanability | Previously primed, scratchcoated, sandbroadcast or coated surface. Clean, sound and visible dry. Tensile strength > 1.5 N/mm² Substrate relative humidity: < 4 % CM Device | Material temperature 15–25 °C Substrate and ambient temperature 10–30 °C Substrate and material temperatures must be ≥ 3 °C above dew point during application and for 24 h. | Electric single or double paddle mixer (300–400 rpm) Mix for 2 min Transfer to a clean container Mix for an additional 1 min and scrape the sides | Rubber Squeegee 40 cm (CT 922 002) Resin Roller 25 cm (CT 961 002) Resin Roller 10 cm (CT 913 001) | Pot life: 60 min. Recoating interval: 10 °C: 24 - 72 h 20 °C: 12 - 48 h 30 °C: 8 - 48 h Ready for light traffic (hours) / fully cured (days): 10 °C: 72 h / 7 d 20 °C: 48 h / 5 d 30 °C: 24 h / 3 d |
